Skip to main content

For DSPs: Manage attendance policies

Define how your employees track time, which rules apply to working time and breaks, and how overtime is calculated.

Written by Franzi Schuetzer

For: Admin, HR Admin

Define how your employees track time, which rules apply to working time and breaks, and how overtime is calculated.


Create and open an attendance policy

An attendance policy defines how time tracking and working time rules work for the assigned employees.

  1. Go to Attendance > Settings > Policies.

  2. Click Add new policy to create a new policy.

  3. To edit an existing policy, select it, click the three-dot menu at the end of the row and choose Edit policy.

The policy settings are divided into two areas:

  • General: policy details, time tracking methods, location tracking, permissions.

  • Rules: shift rules, rest rules, overtime rules.


Configure general settings

In the General area, you set the name, time tracking methods, location tracking and permissions. Go to Attendance > Settings > Policies > Edit policy > General.

Define policy details

Give your policy a name and, optionally, a description so it is easy to recognize.

Note: The default policy cannot be renamed. All employees are assigned to it by default.

Choose time tracking methods

Choose one or more methods your employees use to check in and out:

  • Time sheet management: Create or edit entries manually. Works on desktop and in the app.

  • Punch clock: Real-time tracking with one click.

  • Kiosk: Check in and out at the terminal with a PIN code or QR code.

Recommendation: Many DSPs combine the punch clock with location tracking, or check in with a PIN code or QR code at the kiosk. Activating the punch clock and the kiosk (PIN/QR code) at the same time is not recommended.

Enable location tracking

Enable location tracking to verify that time is tracked within a defined radius. It only works with the methods Time sheet management or Punch clock, and only if employees have GPS turned on. You can require a location at check-in only, at check-out only, or at both. You can decide whether to only warn employees who track time from outside a defined location or without GPS, or to block their entries.

Set permissions

Define which rights employees have for their own attendance entries:

  • Allow entries in the future: If enabled, employees with the time sheet management method and managers can create and edit entries for upcoming days.

  • Attendance entries cannot be edited: If enabled, assigned employees cannot edit their own attendance manually. Otherwise, the permissions from the profile apply.

Recommendation: We recommend leaving Allow entries in the future deactivated.


Configure rules

In the Rules area, you define how the system controls working time and which automations apply when limits are exceeded or bookings are forgotten. Go to Attendance > Settings > Policies > Edit policy > Rules.

Note: Admins can override all rules. Rules apply from the time they are activated and are not retroactive.

Configure shift rules

Maximum hours per day

Set how many hours an employee may work per day. Activate the rule and enter the hours and minutes in the HH:MM field. Then choose a behavior:

Behavior

Effect

Show a conflict in the attendance time sheet when exceeded

As soon as an employee exceeds the limit, a conflict appears in the attendance summary. The time stays unchanged.

Automatically adjust the check out time to match the limit

The check-out time is shortened automatically so that it matches the limit exactly.

Note: The automatic adjustment only applies if the employee tracks their own time. If an admin or HR admin creates or edits an entry manually, the limit is not applied.

Check-in limitations

Define when employees are allowed to check in each day. Activate the rule and choose an option. This rule only applies if the employee has a scheduled shift or a fixed work schedule:

Option

Effect

Can check in from

Employees can only check in from a fixed time.

Cannot check in before their scheduled start time

A check-in before the start of the scheduled shift or work schedule is blocked.

Cannot check in until X minutes before their scheduled start time

Employees can check in a defined number of minutes before the shift starts. Optionally, the check-in time is automatically adjusted to the scheduled start time.

Check out control

Define the behavior when an employee forgets to check out (no end time tracked):

Behavior

Effect

Show a conflict in the attendance time sheet when an end time is missing

You get a notice in the attendance summary and correct the entry manually.

Auto clock out employees after set hours

The employee is checked out automatically after the work time you define. You can enter 12 h 0 min at most.

Auto create time entry

Automatically record a time entry that is added to the employee's working time, for example a fixed changing time. Activate the rule, set whether the time is added before start time or after end time, and optionally choose a category.

Note: The automatically created time entry cannot be edited and contains no breaks. As an admin, you can delete it. This function and Check-in limitations cannot be active at the same time.

Conflicts for overlaps

Define when Kenjo shows a conflict in the attendance time sheet if a time entry overlaps with time off, a public holiday, a non-working day or another time entry, or if an entry is missing on a working day. Every rule can be used for time tracking and, if shift planning is enabled, also for shift planning.

Rule

Behavior

Overlapping with Time off

Choose between two behaviors: allow time entries and show a conflict, or prevent overlapping time entries and time off from the start.

Overlapping with public holiday

Shows a conflict when a time entry falls on a public holiday.

Overlapping with non-working day

Shows a conflict when a time entry falls on a non-working day.

Overlapping shifts

Activated: Kenjo shows a conflict in the attendance time sheet. Deactivated: Kenjo blocks the creation of the time entry at check-in.

Missing full entry on a working day

Shows a conflict when no time was tracked on a working day. The conflict appears the next day.


Configure rest rules

Rest rules make sure that legal or internal rest periods are respected. Go to Attendance > Settings > Policies > Edit policy > Rules > Rest rules.

Minimum daily rest

Define the required break duration (HH:MM) in relation to the work time (HH:MM). In Germany: with 06h 01m of work, a break of 00h 30m is required; with 09h 01m of work, a break of 00h 45m.

You also have these options:

  • Show a conflict in the attendance time sheet: The system flags entries that do not meet the break requirement.

  • Show a reminder to the employee: The employee gets a notice in the app if they have not tracked the break.

  • Deduct breaks automatically: The break time is deducted from the total working time without manual action. Only works for single time entries.

Deduct breaks automatically

Kenjo adds a break automatically when a time entry is longer than the threshold of the break requirement. This feature is in BETA and only considers single time entries.

Example with the break requirement “6 h 1 m of work requires a 30 m break”: A single entry from 08:00 to 16:00 automatically gets a break. Two entries from 08:00 to 12:00 and from 12:00 to 16:00 get none, because no single entry is longer than 6 hours.

The setting is not retroactive. For earlier entries, add the break manually. Automatic break deduction is a premium feature and is not included in all plans. If the option is not visible or is greyed out, contact your Kenjo team.


Rest between two shifts

If you use the shift plan, you can define a minimum rest time between two shifts. If a planned shift falls below this rest time, Kenjo shows a conflict when shifts are planned.


Paid breaks

Activate the setting before the period it should apply to begins. Kenjo does not recalculate payroll you have already sent.

For DSPs in Germany: In payroll, the paid break counts as working time and towards overtime. The contracted weekly hours in the employee profile must therefore include the paid break. Otherwise, Kenjo shows false overtime. Example: If an employee works 8 hours plus 1 hour of paid break every day, Kenjo counts 9 hours per day. With 40 contracted weekly hours, this results in 5 hours of overtime per week.

Recommendation: Most of our DSPs have the Paid breaks function deactivated.


Configure overtime rules

In the overtime rules, you define how extra work is calculated and whether your employees may accumulate negative hours. Go to Attendance > Settings > Policies > Edit policy > Rules > Overtime rules.

Note: Changes only apply to current and upcoming payrolls, not retroactively. To make sure no overtime is recorded, leave Allow overtime deactivated.

Step 1: Allow overtime and choose the calculation method

Activate Allow overtime and set a calculation method:

Method

Basis

Weekly

Weekly thresholds are based on the contracted hours in the employee profile.

Monthly expected

You enter the monthly expected hours in case more or less work is expected in some months.

Monthly average

You enter the monthly average hours calculated over the year if you expect constant overtime.

Hours included in the overtime calculation: Each option lowers the hours the employee is expected to work by the hours of that type. Only hours on working days count. Any time tracked above the remaining target becomes overtime.

  • Include paid time off: If enabled, paid time off lowers the target.

  • Include public holidays: If enabled, public holidays lower the target.

Example: An employee is expected to work 40 hours per week. This week they have 8 hours of public holiday and 4 hours of paid time off, and they track 37 hours.

Both options disabled: The target stays at 40 hours, so there is no overtime.

Only Include paid time off enabled: Target 40 h − 4 h = 36 h, which results in 1 hour of overtime.

Only Include public holidays enabled: Target 40 h − 8 h = 32 h, which results in 5 hours of overtime.

Both options enabled: Target 40 h − 12 h = 28 h, which results in 9 hours of overtime.

  • Allow undertime: If enabled, hours worked below the expected hours are subtracted from the overtime balance, and the time account can become negative. The balance is calculated as starting balance + tracked hours − expected hours.

Recommendation: We recommend activating overtime and using the monthly average as the calculation method.

Step 2: Pay out overtime rule

Define the default behavior for how the system handles accumulated overtime at the end of each payroll period:

  • Pay out overtime automatically: All overtime is automatically marked for payout at the end of the payroll period. Manual adjustments in the payroll table remain possible.

  • Pay out overtime manually: Overtime accumulates in the overtime balance. You define the payout for each employee manually in the payroll table.

Step 3: Public holidays pay rule

Define the default behavior for how the system pays public holidays that fall on a working day:

  • Pay out public holidays automatically: All relevant public holidays are automatically recorded for payout. Manual corrections in the payroll table remain possible.

  • Pay out public holidays manually: By default, no public holidays are paid. You select per employee in the payroll table which public holidays are paid.


Frequently asked questions

Why is working time shortened automatically on one day but not on another?

The automatic adjustment to the daily limit only applies if the employee tracks their own time. If an admin or HR admin creates or edits an entry manually, the limit is not applied and the time stays unchanged.

Why can I, as an admin, track more hours than the daily limit allows?

Admins and HR admins can override all rules of the attendance policy, including the daily limit. Employees who need to exceed the limit therefore contact an admin.

Why can't I activate Check-in limitations?

Check-in limitations and the Auto create time entry function cannot be active at the same time. Deactivate one rule to activate the other.

Why does a conflict only appear the day after the incident?

The rules Check out control and Missing full entry on a working day evaluate a working day only after it has ended. The conflict therefore appears the next day in the attendance time sheet.

Why is there no overtime even though my employee worked more?

Check that Allow overtime is activated in the policy. If the function is deactivated, no overtime is recorded. Also check the selected calculation method and whether Include paid time off and Include public holidays are enabled, because they lower the target.

Do rule changes apply retroactively?

No. Changes to rules such as the daily limit, overtime or pay rules apply from the time of activation and only affect current and upcoming payrolls. For earlier entries, the old values continue to be shown.

Did this answer your question?